You are here: Home » Products » Pile tester » Low Strain Tester for Pile Integrity Testing
Chongqing Gold M& E Equipment Co., Ltd.
Address:  9F/10,Jintai Building, Nanping, 400060,Chongqing,China

Contact person:Michelle Li
Tel: 0086-023-62794421
Fax: 0086-023-62940030
Mobile/Whatsapp: 0086 15922636015
E-mail: master@hy-industry.com
Skype: oilpurifier2010
Share to:

Low Strain Tester for Pile Integrity Testing

The low-strain method uses low-energy transient or steady-state excitation to excite the pile top. The velocity time history curve or velocity admittance curve of the pile top is measured, and the integrity of the pile body is analyzed through wave theory analysis or frequency domain analysis. Judgment detection method
Availability:
Quantity:
  • GD
  • Gold

Product Description

By using the reflected wave method, the device is used to assess the integrity of concrete pile and identify the extent and location of the pile defect. It can be used for testing bored concrete pile and hammer pile. It can also be used for testing the constructions with an exposed top surface such as pillars.

Low Strain Tester for Pile Integrity Testing

Features

a) Wireless connectivity between accelerated sensor and PDA allows easy and more flexible usage on site. PDA can work up to 10 meters away from the accelerated sensor.

b) Real time on-site processing such as smoothing, differential, filtering, exponent and linear amplification can be given to tested waveform.

c) The signal noise can be eliminated by taking average superposition of multiple signals. Superposition signals can be checked at any time, and poor-quality signals can be rejected.

d) Project/pile testing data can be easily saved, accessed, edited, or deleted.

e) Gain value can be adjusted according to length of pile and top surface condition of pile.

f) Intelligent sensor can complete the acquisition work, and upload the data to the computer through the Wi-Fi, get rid of signal wire entanglement, efficient, fast and smooth.

g) True 24 bit A/D data acquisition makes test waveform more real, avoiding the noise and signal distortion caused by floating point amplification.

h) New wavelet processing method can effectively judge the integrity of foundation pile in complex situation.

Low Strain Tester for Pile Integrity Testing


Item

Specifications

Model

GDL-P8000

Control Mode

Android platform

Screen

High brightness, TFT color LCD screen

Data Storage

≥8GB

Operation Mode

touch screen

Sentinel magnify (time)

1、2、4、8、16、32 adjustable

A/D resolution (bit)

24 bits A/D

Sampling time intervals(μs)

6.4~1638.4 adjustable

Max length of sampling

≥2048

Trigger

Signal trigger

Noise voltage of the system (mV)

≤2

Dynamic range(dB)

≥180

Amplifier frequency range(Hz)

1~10k

Max storage length

2048

Amplitude nonlinear degree

≤10%

Fixed point magnification

1, 2, 4, 8, 16, 32,64

Error of time indication

≤1%

Time resolution(us)

6.4

Gain error(dB)

≤1

Continuous working time(h)

>5

Number of channels

1

Interference between the channels

no

Transducer/Probe Sensitivity

(acceleration mode)(mv/g)

≥100

Frequency range of Probe

(Acceleration probe) (Hz)

0.5 ~ 9000



Product Inquiry
 

On-line Contact


Copyright © 2014 Chongqing Gold M& E Equipment Co., Ltd.  All rights reserved. Site Map Supported by Leadong.com